- Horizontal slurry pump
- Vertical submerged slurry pump
- Submersible slurry pump
- Single shell slurry pump
- Slurry pump flow accessories
- Sand pump
- Sand pump
- Filter press feed pump
- Desulfurization pump
- Foam pump
Operating characteristics of the filter press feed pump
Filter press feed pump is currently the most commonly used filtering equipment, mostly used in coal washing, beneficiation and sewage treatment industries. The filtration process of the filter pump feed pump is divided into four stages.
(1) In the first stage (feeding period), as the feed pump is turned on and running, the material in the working space of the filter press increases from scratch, and the pressure gradually increases from zero until the material fills the working space.
(2) The second stage (filter press period) At this stage, the working space of the filter press is already full of slurry. Under the pressure of the pump, the water in the material medium is squeezed out through the filter cloth, and the pressure rise is relatively gentle.
(3) The third stage (holding period) In this stage, the working space of the filter press is full of materials, and there is no longer a large amount of water filtering out. Meet the moisture content requirements of the material.
(4) Fourth stage (discharging period) In this stage, the plate frame is successively opened to make the cake fall to the scraper conveyor until the discharging is completed.
The above four stages are a cycle and run repeatedly, that is, the working process of the filter pump feed pump.
This article is from http://51pdw.com/news/yalvjiruliaobengzhishi/390.html , please indicate the source when reprinting it.
(Responsible editor: slurry pump 51pdw.com )
Previous: How to determine whether your pump is a special feed pump for the second generation filter pressNext : Plate and frame filter press requirements for feed pump Filter press feed pump knowledge
Popular articles on slurry pumps
- 渣浆泵的基本维修方法 >> Basic maintenance method of slurry pump
- 渣浆泵操作的几点注意事项 >> Several precautions for slurry pump operation
- 砂砾泵泵体和泵盖等一些列介绍 >> Grit pump body and pump cover
- 板框式压滤机对入料泵的要求 >> The requirements of the plate and frame filter press on the feed pump
- 介绍砂砾泵 >> Introduction of Grit Pump
- 砂砾泵零部件的使用维护 >> Grit pump parts maintenance
- 渣浆泵不上料或上料不好的原因 >> Causes of slurry pump not feeding or feeding
Recommended article for slurry pump
- 渣浆泵材质高铬铸铁中的合金元素－C、Cr >> Alloy elements in high chromium cast iron of slurry pump material-C, Cr
- 渣浆泵材质高铬铸铁合金中添加其它添加元素 >> Other added elements are added to the slurry pump material high chromium cast iron alloy
- 氧化铝矿用渣浆泵过流件高铬铸铁Cr28的腐蚀磨损性能测试 >> Corrosion and abrasion performance test of high chromium cast iron Cr28 for flow parts of alumina mine slurry pump
- 氧化铝矿用渣浆泵过流件高铬铸铁Cr28的腐蚀磨损性能－材料 >> Corrosion and abrasion resistance of high chromium cast iron Cr28 for flow parts of alumina ore slurry pump－Materials
- 氧化铝矿渣浆泵渣浆泵工况现状分析 >> Analysis of Status of Alumina Slag Pump
- 渣浆泵内部流场之边界条件 >> Boundary conditions of flow field inside slurry pump
- 确保渣浆泵经济运行－输出条件 >> Ensure economical operation of slurry pump-output conditions